Xiaomi has expanded its smart home device lineup with the launch of the Mijia Mite Remover 3 Pro. The new device is designed to tackle dust mites, skin flakes, and allergens on fabrics like mattresses, sofas, and carpets.
The Mijia Mite Remover 3 Pro is currently available for pre-order on JD.com with an introductory price of 599 yuan (approximately $86 USD). The device combines a powerful 17,000Pa suction capability with a lightweight, cordless design weighing just 1.7kg, and incorporates UV sterilization for a more thorough cleaning experience.
Key Features
The Mijia Mite Remover 3 Pro boasts compact dimensions of 244 x 232 x 208mm, making it well-suited for household use where portability and easy storage are priorities.
Its 1.7kg weight, coupled with a cordless design, allows users to clean beds or sofas without the restrictions of a cable – a common drawback of traditional surface cleaning tools.
Xiaomi equipped the device with a powerful motor generating 17,000Pa of suction. Here’s paired with a high-frequency tapping system operating at 72,000 beats per minute to dislodge dust mites, fine dust, and debris embedded within fabric fibers.
The suction inlet spans 20cm in width, enabling broader coverage in a single pass, making it suitable for larger mattresses, family sofas, or area rugs.
Smart Sensors and LED Display
A key differentiator of the device is its intelligent dust mite sensor. In smart mode, the sensor reportedly reads the level of contamination on a surface and automatically adjusts the suction power accordingly.
This information is displayed on a built-in LED screen, which Xiaomi says provides real-time operating status, including an indicator of dust mite levels during use.
This approach demonstrates Xiaomi’s intention to offer more than a simple vacuum. the company is integrating visual monitoring elements to help users better understand the condition of the surfaces they are cleaning.
Battery Life and Charging
The Mijia Mite Remover 3 Pro utilizes a 2,500mAh battery. The device can operate for up to 30 minutes on gentle mode, according to published data.
In smart mode, runtime ranges from 15 to 25 minutes depending on cleaning conditions. The strong mode offers up to 15 minutes of continuous operation.
Xiaomi also includes fast charging support, with a full battery recharge taking approximately 2.5 hours – a relatively short timeframe for a portable household cleaning device.
Filtration System to Reduce Secondary Air Pollution
Another important aspect is the six-layer filtration system. Xiaomi states this system can capture particles as small as 0.3 microns with a 99 percent efficiency rate.
This claim is significant given that mite cleaning tools are often evaluated not only on their ability to remove dust, but also on their ability to contain fine particles to prevent their release back into the air. Xiaomi emphasizes its efforts to reduce secondary air pollution during indoor use.
A dual dust cup design is also incorporated, separating dust and airflow to maintain stable suction performance and reduce clogging.
The dust collection cup has a capacity of 0.4 liters, sufficient for routine cleaning sessions without frequent emptying, particularly for use on mattresses and sofas.
UV Sterilization and Ultrasonic Technology
Beyond suction and mechanical tapping, Xiaomi has equipped the device with a UV sterilization system based on LED technology. This works in conjunction with ultrasonic waves, which are claimed to disrupt dust mite reproduction.
For safety, the UV lamp automatically shuts off when the device is lifted from a surface. This feature is important as direct exposure to UV light can pose risks if not properly controlled.
The dust cup and filter components are also washable, simplifying maintenance and helping to maintain filtration performance over the long term.
Mijia Mite Remover 3 Pro Specifications
- Suction Power: 17,000Pa
- Weight: 1.7 kg
- Design: Cordless
- Tapping System: 72,000 times per minute
- Suction Inlet Width: 20 cm
- Battery: 2,500mAh
- Runtime: Up to 30 minutes
- Recharge Time: Approximately 2.5 hours
- Filtration: Six layers, 0.3 microns, 99 percent efficiency
- Dust Cup Capacity: 0.4 liters
- Additional Features: LED display, smart sensor, UV LED, ultrasonic
The launch demonstrates Xiaomi’s increasing focus on specialized home cleaning equipment. As consumer attention grows regarding indoor air quality and household allergens, the Mijia Mite Remover 3 Pro arrives with a comprehensive feature set for the smart home surface cleaning market.
Source: www.gizmochina.com
